Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1995 940 Windshield Moulding 900 1995

posted by  jd620 on  Thu May 20 18:27 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:42 CST 2014
[RELATED]

I am on the final stretch of getting my daughters 1995 940 Sedan back on the road after a collision with a deer last November. The hood, vent in front of and on bottom of the windshield (proper name?) and two trim pieces around the headlights have been painted and are ready to be put on except for one piece of very brittle plastic moulding that is on the vent in front of the windshield and touches the windshield glass and which broke while removing it. There is a metal trough on the bottom rear of the vent piece that the plastic piece slides into.
Does anyone have a replacement alternative for the plastic piece? Also, can someone give me the Volvo Part Number (Spook?).
I'll try to describe the plastic piece a little more. It comes off with the vent in front and bottom of the windshield and seals the windshield to the vent. There is no movement between the windshield and the vent.
Thanks
--
Mine:3-940s running; 1-740, 2-940 parts; dtrs:4-940s running






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1995 940 Windshield Moulding [900][1995]
posted by  jd620  on Thu May 20 18:27 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.