Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

M47 replacement: What to do while I'm in there 200 1991

The M47 in my car finally blew up, after making noise for probably about 20K miles. I have a spare handy, but would love for someone else to double check my list of stuff I should do while I'm in there and let me know if there's anything I'm forgetting, since I'm putting together my shopping list. Here's what I've got so far:

*Clutch (disc, pp, pilot bearing, throwout bearing)
*Rear main seal
*Guibo
*Driveshaft bearing/bushing/spring/etc. (this has also been making noise)
*All the little bushings/cup things for the shifter
*Those little pins that go in the barrel that attach the shifter to the transmission (anyone have a part number for these?)
*Foam shifter insulator
*Clutch cable/bushing/spring/weight as needed (there's no indication of any clutch cable issues, but just to be safe)
*Shifter cage bushings (how often do these actually go bad?)

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M47 replacement: What to do while I'm in there [200][1991]
posted by  Epic2112  on Sun May 14 17:22 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.