Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turbo tubing size. 200 85

posted by  someone claiming to be Mark on  Thu Feb 22 18:23 CST 2001 [RELATED]

I just got an '85GLTi and need to replace some of the vac lines.7mm seems like too tight a fit. Does anyone know the correct size in either metric or US? Also there is a line running from a small "canister" located on the pas. side wheelwell to a section of the main intake tubing.(vertical section before the intercooler) The small line is just stuck through a hole in the side of the intake tube. Am I missing a nipple there? Is there a conection inside the intake tube? Should Vac line be ok or would fuel line work better?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo tubing size. [200][85]
posted by  someone claiming to be Mark  on Thu Feb 22 18:23 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.