Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil Level Sensor Wires? 700 85

posted by  someone claiming to be Jerry Rogouski on  Sat Feb 24 06:55 CST 2001 [RELATED]

My 85 760 Turbo Diesel's oil level sensor at the oil sump was found with no wires to it (not even diconnected or broke ones in the general vicinity). The Volvo shop manual's wiring diagram does not give a breakdown of this circut for the Diesel. However there is one shown for the B230 engine. My problem is that I don't know if the terminal numbers for the next connector inline (following the circut backwards from the sensor)would be the correct ones to connect new wires to or not. The wires should be solid green according to the schmatic but there are no green wires at the connector??? Any ideas?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Level Sensor Wires? [700][85]
posted by  someone claiming to be Jerry Rogouski  on Sat Feb 24 06:55 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.