Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

TIE RODS/RACK AND PINION 200 1986

posted by  someone claiming to be Brian on  Fri Apr 27 16:38 CST 2001 [RELATED]

Recently I bought new tie rod ends for my brick as the old ones particularly the passenger side which has been so loose of late that the wheel has been knocking back and forth hard enough to shake the whole car, sometimes very violently. The other day I raised the car up on a jack and gripped the wheel at 3 and 9 o'clock and shook it back and forth - just to see how badly the tie rod end was worn out. I observed the actual tie rod itself moving back and forth in the rack. Does this mean that my rack is bad and needs replacing? Or can this be fixed.

Thx

Brian





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New TIE RODS/RACK AND PINION [200][1986]
posted by  someone claiming to be Brian  on Fri Apr 27 16:38 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.