Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Steering Wheel Removal 1800 1973

posted by  someone claiming to be Jeff Kerr on  Tue May 29 19:04 CST 2001 [RELATED]

Having recently rebuilt the steering on my ES, I now need to reset the steering wheel to align properly (spokes at 10 and 2).

Seems the best approach is to pull the steering wheel and reset it correctly but I want to avoid any damage.

I have reffered to all three of my books and looked in the archives but find no specific directions.

Assuming I need to pop the center cover to access the bolt and pull the wheel to reset it, my questions are:

1. Do I pry behind the chrome trim, removing the entire center piece or do I pry between the chrome trim and the black filler?

2. Once the bolt is removed, do I "thump" the back of the wheel to get it loose or will it require a puller?

Thanks in advance for the help.

P.S. After 2 weeks of delving into "hard starting when cold", "poor/ rough idle" and "general malaise", I cleaned the ground point and connectors for the FI wires and Voila!: She's running like a CHAMP!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steering Wheel Removal [1800][1973]
posted by  someone claiming to be Jeff Kerr  on Tue May 29 19:04 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.