Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil Filler Cap Leak, Flame Trap Jiggle 700 1991

I have read all hints,faq and detailed discussions of the PCV system.

I have replace breather box, flame trap element. The brass nipple in the manifold has been cleaned with a drill bit. Small hose attached to this

nipple and disptick oring are brand new. Oil filler cap gasket is also new.

The flame trap holder has been cleaned out.

I still have oil seeping from the filler cap and the cap is jiggling.

I thought I read somewhere that due to the new designed flame trap on this

year model, the car would not pass the jiggle test.

Any ideas, what to do about the oil seeping and the cap jiggle.







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Filler Cap Leak, Flame Trap Jiggle [700][1991]
posted by  someone claiming to be TD  on Thu May 17 08:45 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.