Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

temperature comp. board location 200 91

posted by  someone claiming to be Molly on  Sat Jun 23 13:00 CST 2001 [RELATED]

After enduring several years of an erratic temp gauge, I decided to remove the instrument panel on my '91 254 to check for loose wires, clean the temp comp. board, and/or voltage regulator. I was able to remove the cluster, now I can't figure how to remove the temp. comp. board. Also, I can't find the voltage regulator!! The two prongs, where I think the regulator goes, have a piece of rubber over them. Is it possible that the previous owner, manager of the local Volvo dealership, removed it and covered it with a piece of rubber? Do I really need this regulator? Is this the source of my crazy gauge? Am I looking at the wrong thing? Finally, as I was removing the inst. panel I noted an exposed white/green wire. The wire is part of a group of three wires that attach to the white panel on the back of the instrument panel. What is this wire for?

Please help and thanks in advance!!!!!

Molly





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New temperature comp. board location [200][91]
posted by  someone claiming to be Molly  on Sat Jun 23 13:00 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.