I have tried almost everything in my scope of knowledge. Distributor, wires, plugs, pumps (fuel pressure is correct), cleaned the TB and new injector seals this weekend, all new vaccum hoses and the venturi cleaned and set up correctly.

Note: car is a Canadian B230E CIS 100,000kms sat for three years

Almost all polution controls have been removed ... and I can also find no evidence of an throttle positiion switch. The car gave me a great deal of frustration in the extreme cold, but runs OK now. The problem I am having is a rough idle under load. She idles around 1200 in park and about 700-900 under load, but it bounces. The idle bogs down when I put it under load but does not stall out unless I adjust the idle bypass valve to a lower resting idle. Should I mess around with the throttle stop screw. The throttle body seems yto work correctly but the outlet off the back of the body has been blocked off. Someone stripped a lot of pollution stuff off this baby. Any suggestions for this stumped, yet handy, woman greatly appreciated.