Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

anyone replace rear tranny mount bushing on a 760GLE? 700 1989

posted by  someone claiming to be Herb Goltz on  Thu Jul 5 10:06 CST 2001 [RELATED]

I have an '89 760GLE w/AW-71 tranny that appears to need a rear tranny mount bushing. This is the mount with the round bushing housing with the pressed in bushing with two rubber rings on either side where the tranny mount bolts attach to the subframe.

Is this a DIY kind of job? Does the housing containing the bushing come off? I am considering trying to find one with a good bushing in it (mine is cracked inside, and the driveline vibrates when accelerating from a standstill) at a boneyard and just installing it with new rubber rings.

Any advice would be appreciated!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New anyone replace rear tranny mount bushing on a 760GLE? [700][1989]
posted by  someone claiming to be Herb Goltz  on Thu Jul 5 10:06 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.