Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Using older 240 wheels on newer 240's 200 1988

posted by  someone claiming to be Jim holst on  Tue Nov 6 10:18 CST 2001 [RELATED]

We have an '86 245 and an '88 240. Both these cars came with sets of studded snow tires as extras. The problem is that the wheels don't have the holes for the locating pins which, I think, were added in 1986. The PO must never have tried these wheels. I'd like to keep these snow tires and wheels for the rare times we get much snow here in my part of Oregon. Has anyone tried the following: (1) replace the locating pins in the hubs with the flat machine screws used in the earlier models (pre 1986); (2) drilling holes for the locator pins in the old wheels? If so, how did it work out?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Using older 240 wheels on newer 240's [200][1988]
posted by  someone claiming to be Jim holst  on Tue Nov 6 10:18 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.