To remove the interior grab handles, remove the cover strip in the center of the handle. It's the section with the fake stitching on it. A small screwdriver pushed inward at either end of the strip will push it out a bit, then it just pulls free.

Under the strip there will be 2 Torx screws at each end of the handle.

89 or older cars have phillips head screws.

If the trim caps over the driver's door have to be removed , they're a pain. They snap over a white plastic piece which is screwed to the roof.

They're tough to get off without either snapping the plastic piece or making gouges in the cap or surrounding roof trim.

Good luck!