The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: interior handle is loose 900 1993

posted by  someone claiming to be Rob Bareiss on  Mon Apr 17 15:19 CST 2000 [RELATED]

To remove the interior grab handles, remove the cover strip in the center of the handle. It's the section with the fake stitching on it. A small screwdriver pushed inward at either end of the strip will push it out a bit, then it just pulls free.

Under the strip there will be 2 Torx screws at each end of the handle.

89 or older cars have phillips head screws.

If the trim caps over the driver's door have to be removed , they're a pain. They snap over a white plastic piece which is screwed to the roof.

They're tough to get off without either snapping the plastic piece or making gouges in the cap or surrounding roof trim.

Good luck!





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.