Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cracked block, anybody seen this before? 200 85

posted by  someone claiming to be Rob Hanley on  Thu Dec 14 17:24 CST 2000 [RELATED]

My '85 245 has been leaking oil from an unknown-to-me source since about 197k. I now know why. I was going crazy trying to find the source of the leak, until I decided to spray down the engine bay. Now I'm starting to wish that I hadn't done that. There appears to be a crack in my block, down by the foundry mark. It isn't very big, maybe a quarter of an inch long and 1/3 of an inch in diameter. It leaks out about half a quart of oil in a week.

Niiiiiiiice. I guess that's what I get for being an obsessive "maintenance-aholic." I'm sure Don Foster is gonna blame this on my use of Fram oil filters. So guys, give it to me straight. How much longer do I have? What are the chances of the "crack" getting bigger? If I keep topping off the oil, how long can I avoid throwing a rod? Should I try something like JB Weld on this??





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cracked block, anybody seen this before? [200][85]
posted by  someone claiming to be Rob Hanley  on Thu Dec 14 17:24 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.