Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Adjusting AMM to control CO 200 1989

posted by  someone claiming to be Randy Starkie on  Thu Apr 12 09:44 CST 2001 [RELATED]

MVP Inc. has a nice tech tip about actually making a tester to attach to the LH 2.0 and LH 2.2 system so that you can control the CO level by adjusting the AMM. See the link below and go to #7.

My problem is that I want to adjust the AMM as described in #7 but I need to do it to an 89 240 which has the LH 2.4 system. There are no pigtails as described for the 2.0 and 2.2 systems. Can someone tell me how to make the necessary adjustments to the LH 2.4 system. This car squeaked by on the CO level of emissions at the last test (two years ago) and I'd like to check the AMM adjustment before I take it in for the test this time. Thanks for any help on this.

Randy Starkie





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adjusting AMM to control CO [200][1989]
posted by  someone claiming to be Randy Starkie  on Thu Apr 12 09:44 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.