Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

relay for e-code lights 200 86

posted by  someone claiming to be doug stimac on  Sun Aug 12 05:21 CST 2001 [RELATED]

Im curious if anyone has put together a wiring block for higher voltage lights used with e-code lamps?

I've got a new set of e-code lights from Verrigni Marine in Bocca Ratton - they look hot, are a permeant cure to the aged fogg look of the plastic lense and are a great improvement over the american light pattern. I'd like to up the output on the bulbs, from a 40/60 to a 80/100 and i need to change the wire in the process. Has anyone information on a satisfactory setup for this?

Thanks.

doug stimac

tampa





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New relay for e-code lights [200][86]
posted by  someone claiming to be doug stimac  on Sun Aug 12 05:21 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.