Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

#3 fuel injector quit, swapped injector but problem stayed at #3 cyl 700 88

While trying to solve IAC woes (not solved) i disconnected batt. after reconn batt #3 cylinder isn't working,

i have verified that spark is good, i have swapped injectors, but problem stays at #3

if i disconnect wires to #1 cyl injector while running i can see electrical pulses with my multi meter

at injector #3 there is no apparent electrical signal

could i have messed up the ECU or sometheing when i mistakenly grounded the red/white wire when tring to reset the base idle speed? (still do not know how that is supposed to be done)(more on that later)

i am still reading 4.65 vlts at the O2 test point

1988 765 ti







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New #3 fuel injector quit, swapped injector but problem stayed at #3 cyl [700][88]
posted by  someone claiming to be vroom  on Sun Aug 12 05:23 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.