Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Removing speedo sensor 900 1991

posted by  someone claiming to be velan on  Mon Aug 13 14:00 CST 2001 [RELATED]



Hi guys,

This weekend I am going to remove the speedo sensor on the rear axle to do some wire soldering. The cause of my speedo intermitent failure is the wiring. Some goons must have previously cut the wires there and then attached again and cover over it with tapes. I trace the problem to down there after I had speedo failure and wriggling the wires with tapes there got the speedo working again.

So before I do anything I need some help here. If I remove the speedo sensor from the axle, will I be causing the gear oil to drain out? I don't keep extra gear oil with me and I don't want to find out the hard way.

Thanks in advance.

velan

Volvo940GLE, 16 Valve, Kuala Lumpur, Malaysia.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removing speedo sensor [900][1991]
posted by  someone claiming to be velan  on Mon Aug 13 14:00 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.