Volvo RWD ALL Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 ALL INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Head of B20 not draining ALL 1965

posted by  someone claiming to be Brett Sutherland on  Sat Sep 1 02:44 CST 2001 [RELATED]

Hi Guys .. Just crawled out from under the 1.5 million Mile 122 after installing a new camshaft and had a question for you .... has anyone come up with a way of making sure the doggone head drains it's antifreeze so that it doesn't dump about a half liter of fluid into the oil pan when you break the seal at the head gasket ? Yes I had the radiator completely removed before I lifted the head and nothing more would drain out from the lower hose .... I hope not to have to do this job again in the near future ... but I am sure that someone else out there will be having to lift a head in the not too distant future and could also use a solution to this annoyance .....

OK another question that I have asked before and not gotten any answers from the board .... Has anyone installed a Rack and Pinon on a 122 ? If so what Rack did you use and were the results worth it?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Head of B20 not draining [ALL][1965]
posted by  someone claiming to be Brett Sutherland  on Sat Sep 1 02:44 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.