Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wiring harness replacement 200 1983

posted by  someone claiming to be Dennis W. on  Sun Sep 16 04:01 CST 2001 [RELATED]

I have a 1983 245 non-turbo 2.3 fuel injected with the crumbling wiring problem. I have checked a couple of places for the price of the wiring harness. The best quote so far is $430. Is this a good price or should I keep looking. I have read the threads on electrical systems for 240's and plan to remove the intake manifold to get to the wiring. I also plan to replace the flame trap and injector seals. Any other advice?

I have owned a 1975 245 for 10 years and 90,000 miles but the 1983 is new to me. I just found this Brick Board. It's great, but I am a little confused about Bricks. Why Bricks? Solid? Boxy? Tough? Heavy? Slow? All of the above?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiring harness replacement [200][1983]
posted by  someone claiming to be Dennis W.  on Sun Sep 16 04:01 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.