Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help stupid do-it-yourselfer 940 Station Wagon

I tried to do the rear brakes and like an idiot disassembled the caliper instead of just punching out the pins and removing the clip. (Duh!!) Now because the fluid leaked out I have to depress the brake pedal almost all the way to get the car to stop. I also used a c-clamp to depress the two sides of the disassembled caliper in order to fit the pads in and reassemble the caliper. I must have air in the lines I would imagine. Please instruct me as to how to bleed the brakes so that they will work right. I did reassemble the calipers to where they were originally so will that be O.K.??

Kevin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help stupid do-it-yourselfer 940 Station Wagon
posted by  someone claiming to be Kevin Johanneson  on Mon Oct 1 09:40 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.