Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Stalling 240 GLTi 200 1983

Once again, I thought I had rid myself of this horrible problem, but it has yet again shown it's ugly face. My brick seems to suffer from random stalling and sometimes stumbling/surging. This is more common to happen in cooler weather above 3k RPM, while the car is stumbling/surging if you were to push in the clutch and let off the gas the car would stall.

At times the car will stall without the stumbling effect, holding in the clutch and coasting for 15-20 seconds and then releasing the clutch will normally result in a restart (Some cases have lasted 40s+). In a stall condition the car will start almost instantly upon cranking, but sometimes falter and stall once again.

Ideas? rotor/wires/cap/plugs all new. Car has the k-jetronic CI system.

Help appreciated,

Jeff






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stalling 240 GLTi [200][1983]
posted by  someone claiming to be Jeff  on Thu Oct 4 00:25 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.