Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Valve Lifters on 740 700 90

posted by  someone claiming to be David Harris on  Wed Oct 10 15:56 CST 2001 [RELATED]

I have a 740 Turbo - B23FT engine which seems to have a lot of lifter noise, especially at low engine speeds. I'm not sure if I have hydralic lifters or shimmed lifters but I have had the head off and found nothing that looked like a shim. The valve lifter tops appeared to be cups about as deep as they are round without any hint of a hydralic mechanism. I suspect that the lifters need some attention based on the intermittent clacking noise. How can I tell if I have hydralic lifters or not? I've looked at the archives and read much about adjusting the shimmed lifters. Any other advice?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Valve Lifters on 740 [700][90]
posted by  someone claiming to be David Harris  on Wed Oct 10 15:56 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.