Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2015 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Correct belt path for 940T 900 1993

posted by  SwedeSam on  Mon Dec 31 04:35 CST 2001
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I need to replace my alt. belt on my '93 940T (sedan) and the guys at the local auto parts store spec'd a belt which is, like, way too short - I can only make it fit by cranking the alt. all the way down and stretching the belt on the pulley (outer pulley) from the crankshaft pulley. Other possible routes (not with this belt) are crankshaft to water pump to alt. & back around to c'shaft OR straight down to A/C (I don't think so). My Chilton's manual has no diagram for such (no big surprise). Do any of you know the proper belt path and proper belt spec.

Thanx for any help!

Sam






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Correct belt path for 940T [900][1993]
posted by  SwedeSam  on Mon Dec 31 04:35 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.