Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Flame trap question 200 1987

posted by  someone claiming to be goober on  Tue Jan 15 12:07 CST 2002 [RELATED]


Bricksters,
I recently cleaned the flame trap on my 245. After finding out that it is easiest to access the flame trap by removing the distributor cap and coming in from the front,I tried to run a coat hanger down into the canister that the flame trap tube connects to clean it out and found that the hanger would only go in about two inches or so and then hit something and stop. Is this normal, or is it blocked? I have been chasing some nagging oil leaks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame trap question [200][1987]
posted by  someone claiming to be goober  on Tue Jan 15 12:07 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.