Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel line between pump & filter, how much pressure? 200 1991

posted by  hobbit on  Thu Jan 17 05:41 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

When I changed the fuel filter, I kinked the hard plastic fuel line that runs between the pump and the filter. It is a hard plastic line about 3" long. When I started it up, I noticed a pin hole leak. As it was late at night, and I needed t use it the next morning, I used a rubber fuel line with band clamps. Is this going to hold? How much fuel pressure does the line have to hold? Is this line made out of something other than rubber because of the alcohol content of hi-test? (MTBE) It is holding for the time being.
Thanks -
Steve M.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuel line between pump & filter, how much pressure? [200][1991]
posted by  hobbit  on Thu Jan 17 05:41 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.