Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2014 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Do I need a super stud? 140-160 1970

posted by  someone claiming to be chris ulrich on  Thu Jan 24 10:23 CST 2002 [RELATED]


I've noticed that 90% of B30s out there that I've
looked at have at least one broken manifold stud.
My car has 2 broken ones and a couple that keep
working the nut loose. I can kind of understand
why -- with the carb manifold you need to use the
force in order to turn some of those, and it is
probably hard to use a torque wrench on them.

While I replace the head (got a spare FI head
with new valves) should I pull all the studs out
and put in some crazy super strong studs from
ARP or something similar? I don't want to deal with
broken studs ever again. I'm planning on pulling
the head, installing new lifters/pushrods/cam, and
then sealing the motor up for good...

How are you suppose to check the torque on these?
And what is that torque suppose to be (and would it
be different with super-strong studs and bolts?)
chris






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do I need a super stud? [140-160][1970]
posted by  someone claiming to be chris ulrich  on Thu Jan 24 10:23 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.