Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

m46 output shaft seal 200 1989

posted by  volvo242 on  Mon Jan 28 00:59 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 4 04:52 CST 2001
[RELATED]

The automatic died due to po neglect so I've opted to transplant an m46. I want to change the output shaft seal before installation. Went to the local dealer; the seal they referenced is not the same as what I removed. The od diameter (approx. 63-64mm, give or take for seal swell) is larger than the dealer referenced seal. The dealer suggests all m46 are the same(?) Any suggestions or info to resolve this would be greatly appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New m46 output shaft seal [200][1989]
posted by  volvo242  on Mon Jan 28 00:59 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.