Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

242glti intake/exhaust manifold conversion/stumbling 200 1983

posted by  someone claiming to be Richard Rider on  Mon Jan 28 03:10 CST 2002 [RELATED]

Hey guys,
I am moving along w/my "racecar",and just finished intake rr from b230 and followed T'bricks to the letter.Also added exhaust mani from 940T,had the flange milled to accept a rebuilt Garrett T3.
I also changed out the overboost switch to an intercooled from a wrecker(sorry).Anyway before the mods,I would only get stumbling when I would crank the boost up to around 9 or 10psi,before the o'boost swap.
Now,I get stumbling anytime I get into boost area.Ive pretty much checked all vacuum lines for leaks,but still lookin'.Rechecked timing and dist might still be a little off,but Im gettin a light and gonna check it out.
Any other ideas?
Thanks
RR






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 242glti intake/exhaust manifold conversion/stumbling [200][1983]
posted by  someone claiming to be Richard Rider  on Mon Jan 28 03:10 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.