Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need instructions on main seal, tranny seal, and clutch 200 1983

posted by  someone claiming to be douglascrowder on  Mon Feb 18 04:20 CST 2002 [RELATED]

I have an 83 240 and an oil leak on the main seal. 2 days ago I found not only the small leak from the main seal but now a large pile of tranny fluid on the ground. I have a 4 speed stick w. overdrive. I am told that when doing the main seal that you might as well change out the clutch. AS for the tranny fluid I assume it is a tranny seal causing this. What I need to know is what are my major steps in getting to the main seal. remove drive shaft, un mounting the tranny, bell housing etc. I am looking for the main steps in order and any possible problems I might face. My independent Volvo shop wants $700 for this job and I simply don't have the money. Let me know what you all think... Also do you have any recomendations on a clutch, what kind and where to get. Web site or something. thanks, Doug...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need instructions on main seal, tranny seal, and clutch [200][1983]
posted by  someone claiming to be douglascrowder  on Mon Feb 18 04:20 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.