Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2009

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

HEAVY gauge wire to Fuel Pump and a wild hair up my.....voltage....

posted by  pablos on  Sun Mar 3 12:22 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 22 00:43 CST 2001
[RELATED]

Before I surf over to TB, has anyone contemplated or completed running heavy gauge wire right from the battery/alternator to the fuel pump? I mean like 8 gauge or something? With a local relay, using the original FP power wires as the "switching" circuit? (and of coure your new HD wire and FP as the switched circuit)

The voltage drop to the fuel pump on most cars (Volvo included) is not insignificant. Measure it! Less than 11.5V at the pump, closer to 11 or less I bet. Not that the car won't run OK as configured from the factory, but in high acceleration, safety escape times, everything counts.

OF course I would do a proffesional job, with a fuse/CB and the wire would need protection, plus the relay would have to be super duty and well located and protected.

Am I whacked?
--
http://www.fidalgo.net/~brook4/oilslubesfilters.html






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HEAVY gauge wire to Fuel Pump and a wild hair up my.....voltage....
posted by  pablos subscriber  on Sun Mar 3 12:22 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.