Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Parts compatibility - 1988 to 1990 740 turbo 700

posted by  Curtmp on  Thu Mar 14 15:35 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 10 07:48 CST 2010
[RELATED]

Parts compatibility - 1988 to 1990 740 turbo

At long last we have settled our pending insurance claim on a 1998 740 turbo that was totaled in a collision. We have purchased a 1990 740 turbo and have kept the damaged 1988 to salvage parts. The 1998 has a carefully rebuilt engine and head; distributor seal; new calipers, rotors brake pads; electric coolant fan; and tires. There is about 11,000 miles or six months use on the motor and parts. The tires were less than two weeks old.

We are interested in opinions regarding the 1998 parts that will work on the 1990.

Engine - It appears the block and head are identical. I presume if I switch, I will need to install the following 1990 parts on the block: intake manifold and throttle body; exhaust manifold, turbo and turbo oil lines; sensors.

Rims and tires - appears to be identical except for the visual style of the alloy rims.

Rotors

Calipers and brake pads.

Oxygen sensor

Other suggested parts to strip off?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Parts compatibility - 1988 to 1990 740 turbo [700]
posted by  Curtmp  on Thu Mar 14 15:35 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.