Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

outer tie rod end 200 1990

posted by  someone claiming to be zakir on  Sun Mar 17 04:49 CST 2002 [RELATED]

I bought a pair of outer ties rod ends and the steering boots. Is there supposed to be a ball stud on the outer tie rod end? (at least that is what is mentioned in pg 10-12 of the haynes manual).I did not get one when I bought the tie rod. There was also no description of a ball stud that goes over the tie rod end in the fcpgroton website.
Also the nut on the tie rod end does not go all the way in, so there has to be something else that goes in.

As the steering boot, can I clamp them with the regular round metal clamps that can be purchased in a regular auto store.

thanks
zakir





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New outer tie rod end [200][1990]
posted by  someone claiming to be zakir  on Sun Mar 17 04:49 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.