Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

exhaust side hose fitting? 700

posted by  v diddy on  Sun Mar 17 05:54 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I was investigating the exhaust side of my B230FT engine and came across a curious looking hose fitting mounted about 6 to 8 inches below the fourth spark plug.
It appears to be made out of copper and have a hole in the end. It has ringed barbs for what I suspect is a hose. It is not a turbo oil hose, or a coolant line , I think?
I have found this fitting on turbo and non-turbo b230 engines.

I'm just hunting for it's purpose and what it should be attached to.

1986 740 B230FT
330k kms

P.S. it seems to be at the end of the block next to the transmission bellhousing (manual transmission) if that also helps






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New exhaust side hose fitting? [700]
posted by  v diddy  on Sun Mar 17 05:54 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.