Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Problem with Accessory Gauge Install???? 200 1987

posted by  sidneyw on  Sun Mar 24 17:38 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 17 15:10 CST 2007
[RELATED]

Hi All,

This weekend I ventured into the electrical realm and wired in a small clock and voltmeter for my 1987 240DL. However after all the splicing and dicing the light for my clock does not work. At some point it was working but now it doesn't. I've checked and rechecked my wiring job and I can't seem to find the problem. I basically spliced the grounds and light sources from the voltmeter into the mini-harness ground and light power lead going from the back of the clock to the tach. Can anybody offer any suggestions??


Thanks!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Problem with Accessory Gauge Install???? [200][1987]
posted by  sidneyw  on Sun Mar 24 17:38 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.