Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

orientation of the bushing on ext housing (tranny output shaft) 200 1990

Does anyone know the orientation of the bushing that sits on the extension housing ( tranny output shaft).

a) I called the volvo dealer ship , they says it goes on top but does not matter.

b)The FAQ says it goes anyway, but should not be lined up with the grove on the housing.

c)When I removed mine, the hole was lined up with the groove ?

Any one know for sure? Randy, any ideas ?
I though with the hole lined up with the groove, the oil would flow into the bushing and allow lubrication.

thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New orientation of the bushing on ext housing (tranny output shaft) [200][1990]
posted by  someone claiming to be zakir  on Mon Apr 1 10:25 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.