Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2021 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

torque on exhaust clamps? 700

posted by  invar on  Thu Apr 4 13:42 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 26 21:00 CST 2010
[RELATED]

my rear muffler just went. it got rusted through in the rear where the tail pipe meets.

i'm going to replace it myself because it seems rather straight forward. i'll be ordering:
(2) Bosal Exhaust Clamps 58mm - $4
(1) Bosal rear muffler $44.62
(1) Bosal tail pipe $15.83

all from here

Is that everything that I'll need or am I missing something? I'm positive that the leak is the rear muffler and everything to the rear of that. That being said, is it as straight forward as I believe? Undo current rusted clamps, yank muffler off the axle pipe, put new clamps in, and torque to spec? And also, what should I be torqueing the clamps to?

While I'm at it, should I be getting the Bosal stuff? I have a choice between Bosal and Starla. If Starla is a better brand, then I'll order it from FCPGroton instead.

Thanks a lot!
--
-Kenric Tam
1990 Volvo 740 sedan (B230F)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New torque on exhaust clamps? [700]
posted by  invar  on Thu Apr 4 13:42 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.