Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Throttle Body Cleaner in Manifold? 200 1990

Thanks to the members of this board, I cleaned out my throttle body..Removed it, cleaned it, and replaced the gasket. It really wasn't dirty though..a good thing I guess. I looked in the manifold while the throttle body was off and wondered if i should spray some of the cleaner in there. (I didn't though tempting as it was to spit shine the inside)

I read on other web sites (re: other makes) that you can spray the inside of the attached throttle body into intake manifold with "throttle body cleaner" or "Mopar Combustion Chamber Cleaner." Supposedly this works very very well..Albeit with another vehicle. So why do us Volvo fanatics have to avoid keeping the cleaner out of the manifold and have to remove the throttle body to clean it?

See this site:

http://www.neons.org/howtos/MoparCleaner.html

I know its for a Neon but why can't I use the same procedure for my 1990 240? Any bad effects to this procedure?

Regards,

JBW






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle Body Cleaner in Manifold? [200][1990]
posted by  JBW  on Sun Apr 7 08:41 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.