Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

245 Electric Tailgate Lock Not Working & Glue for Plastic Moulding at Bottom or Doors. 200 1992

posted by  Dan Marino on  Sun Apr 7 14:29 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

Hello Folks:

After a busy weekend of yardwork, I noticed that my electric tailgate lock is not working. All the other door locks work properly when I lock and unlock the driver's door. I thought it might be the wiring harness, but the rear windshield wiper seems to work fine. Any advice before I go taking the tailgate panel apart? Possibly a fuse?

Also, a few of the plastic door mouldings that go along the outside bottom portion of the doors are starting to come off. What adhesive is best for sticking them back into place?

Thanks Guys,





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 245 Electric Tailgate Lock Not Working & Glue for Plastic Moulding at Bottom or Doors. [200][1992]
posted by  Dan Marino  on Sun Apr 7 14:29 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.