Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Windshield wiper is a no go... and any tips on replacing an oil pan 200 1983

Currently the windshield wipers in my 83' 242ti are not working, but the fuse is good and when I pull back the stock the squirters for the fluid work just fine.

The car had been sitting since november beacuse of an accident, and i just recently got it up and able to drive into my garage. The wiper motor is new (1yr old), but I still need to test the connections to check for voltage.

Thanks for any hints or ideas.

Zack


Silver 83' 242ti (almost back on the road again, after the oil pan is replaced.)

PS: I would appreciate any tips on replacing the oil pan as well. Mine was dented from the accident at the bottom by the drain plug. I read the info on the 700-900 faq about making a jig to hold the engine up, which seems like a good idea.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Windshield wiper is a no go... and any tips on replacing an oil pan [200][1983]
posted by  kaperz81  on Tue Apr 9 11:21 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.