Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

fuel filters as PS and ATF filters? 700

So I got a cheapo $1.99 fuel filter from Autozone and put it on my windshield washer line to keep the nozzles from clogging. That flows fine.

But is it safe to use a cheapo fuel filter on the PS return line as well as the ATF return line?

I'm worried about possible resistance to flow issues. Washer fluid is okay since it's not thick and flows like gasoline. But PS and ATF fluids are thicker types of oil, and I don't want it to be restricted by the filter.

If this is an issue, I might just have to shell out some $$ for the Magnafine magnetic filters, but it'll have to wait till I save up a tiny bit.

Also, I've been told that to keep the intake clean, I might want to place a tiny fuel filter in the breather hose that comes out of the top of my flame trap, which will prevent the throttle body and intake from getting crudded up so easily. Any one have any input on this?

Thanks.
--
Kenric Tam
1990 Volvo 740 base sedan (B230F)
My Volvo 'Project'






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New fuel filters as PS and ATF filters? [700]
posted by  invar  on Wed Apr 17 05:37 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.