Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

OBD Code 2-3-2 on B234F 16v 700

uid 7350's pic
posted by  Cliff8928 on  Sat Apr 20 17:27 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I had just had a hard-start sitiuation on my 89 740 16v now that it got a little colder (only seems to do it when cold) and i got the OBD code 2-3-2 (off Port#2) this says "Fuel Trim (lambda control) too lean or too rich at idle" BUT my Service-Engine light does NOT come on (it does when i turn the key on) How do i know where the problem is? Oxygen Sensor? Fuel Pressure? Bad Injector(s)? I also get fairly low fuel mileage (just recorded 16.7 MPG for this tank)... The oxygen sensor shouldn't be faulty, because i just changed it... (had to re-tap the converter after removing the old one!!)... Is there any instructions for installing a pressure test port for the fuel pressure (permanent installation??)

Cliff Scott
89 740 16v <-sometimes takes a while to wake-up






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OBD Code 2-3-2 on B234F 16v [700]
posted by  Cliff8928  on Sat Apr 20 17:27 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.