Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What do you solder on the 1 by 1 by 2 relay that deals with the over drive. 700 1986

posted by  someone claiming to be VolvoBoy on  Wed Apr 24 10:05 CST 2002 [RELATED]

I have a 1986 Volvo 740 GLE. My car will not kick into overdrive. I was told to solder the relay and that might fix it. But I don't know what I am supposed to solder. On the overdirve it has a little thing that makes a connection. does anyone know whether this is supposed to make a constant connection or just a quick connection and then release. If anyone knows please tell me. I have another question. What to you need to do to the Overdrive Solenoid. I can pull off the only wire that goes to it. If I do this when I take the car out for a drive it will then kick into overdrive but as soon as I shut it off it will not kick into overdrive again. So by pulling off this wire does this like reset the relay and make it kick into overdrive.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What do you solder on the 1 by 1 by 2 relay that deals with the over drive. [700][1986]
posted by  someone claiming to be VolvoBoy  on Wed Apr 24 10:05 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.