Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 front shock absorbers 900 1991

uid 6185's pic
posted by  blue940 on  Fri Apr 26 13:11 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 21:11 CST 2014
[RELATED]

Hi all,

I have a 91 940 sedan which needs to have the front shock absorbers replaced. I am gradually obtaining the parts to do this job. So far I have the strut mounts and bearings, the bellows and the radius rod bushes. Still to get are the bump stops (currently torn) and the shock absorbers.
The shockies that I can get most easily are Sachs gas shock absorbers? Does anyone have any experience with these? Aren't they made by Boge? Or do I have it wrong?
Also, I have Boge shocks on the back (Comfort ones I believe) is it a good or bad idea to have gas on the front and Comfort on the back? At the moment the back end skips a bit over bumpy corners and is a little disconcerting. Front Sachs were about Au$117 each and back ones Au$106 each making it about $450 for a set.
What are these Sachs like? Are these the ones made in Mexico? I'd like to retain a comfortable ride and I know that any new shockies would improve the handling. I'm no racing driver but I do like good control.

Any input will be greatly appreciated.
Thanks
Brad.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940 front shock absorbers [900][1991]
posted by  blue940  on Fri Apr 26 13:11 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.