Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum fittings on intake manifold 700

posted by  Blair on  Fri May 3 13:02 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a 90 745ti and have taken the vacuum lines off of the intake manifold without marking what fitting they go to. I know the fitting towards the firewall goes to the oil separator but am not sure about the other two. One goes to the turbo and one goes thru the firewall. It does make a difference as one of the fittings has a small orifice on the thread end. any help would be appreciated.

Blair






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vacuum fittings on intake manifold [700]
posted by  Blair  on Fri May 3 13:02 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.