Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Elring cam seals as verses volvo 200

A while back I had a 240 with a slight groove wore in the cam. I installed 3 elring brand seals in a row and could not get a tight seal. Finally I measured the seal and the Elring was clearly larger diameter than the volvo. So I installed the volvo and had no more problems. I put a lot of these seals on and do not want to pay for volvo seals. Does any one know whether there is a good quality seal with the same dimensions as the stock seal.
Thanks Kevin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Elring cam seals as verses volvo [200]
posted by  someone claiming to be kevinatreninet  on Fri May 3 14:38 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.