Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2018 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Filter Adapter leak 700 1990

posted by  Slawomir on  Tue May 7 16:00 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello !

My 765 Turbo developed an oil leak from the oil adapter. To be specific it leaks right where this big green O-ring goes. Between thermostatic head for the oil cooler and adapter body. I tried to disassembly it today but as the thermo head slides of the threaded oil filter pipe it hits oil return line from the turbocharger. Here is my question: Is there a safe way to change the o-ring without complete disassembly? I would like to avoid removing the oil line from the turbo as I may not get it back in place. Should I stretch the o-ring to get it over the adapter?
Which way should I go? I count on Your expertise.

Thank you in advance,

Slawomir






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Filter Adapter leak [700][1990]
posted by  Slawomir  on Tue May 7 16:00 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.