Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Cam Plug proper removal and install 200 1990

posted by  Big Joe on  Mon May 13 14:08 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 16 08:29 CST 2011
[RELATED]

I noticed a leak on my dads 240 from what looks to be the rear cam plug. I have performed this replacement on my car (it's a solid round plug)and just want to make sure that this is the way to replace it.

1) remove valve cover and gasket.
2)place a screwdriver from the inside and tap the plug out with a hammer (tapping the screwdriver till it the plug pops out).

Is this the proper way to do this (without damaging anything)or do you guys have a different method.
Also whats the best way to reinstall the plug so it seats right.

Many thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Cam Plug proper removal and install [200][1990]
posted by  Big Joe  on Mon May 13 14:08 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.