Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

In-tank fuel pump assembly hoses 200 1983

posted by  peterseaton on  Wed May 15 12:43 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 22 16:19 CST 2002
[RELATED]

There are 2 hoses that run from the in-tank fuel pump assembly:

One is the delivery of fuel to the external fuel pump.
The other is return fuel to the tank.

In changing the pump I had to cut the return fuel line and to my surprise, it is mounted on a barbed fitting. This plastic hose (covered by rubber jacketing hose) is getting brittle and I want to replace it.

The other end of this hose seems to connect to a rigid line with a coupling and is clamped in the vicinity of the driver side rear wheel well.

Does this coupling also have a barb fitting for the return fuel line? In other words, does the flexible line connect to a barb on both ends or do I need to purchase a hose/coupling assembly?

Please save me hours of volvo supination






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New In-tank fuel pump assembly hoses [200][1983]
posted by  peterseaton  on Wed May 15 12:43 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.