Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ran into a problem changing my timing belt. 900 1994

posted by  Mike 94 940T on  Tue May 28 04:05 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hey guys,
I was changing the timing belt on my 1994 940T this weekend and ran into a small problem. After I got all the various belts off (i.e., Alternator, a/c, etc) I began working on the harmonic balencer (crankshaft pulley) Got the bolt off fine, but I could not for the life of me get the pulley off the crankshaft. Tried prying behind the thing using a block of wood for support and leverage and I couldn't get it off. Do I need a pulley remover for this? If I do could I use the "hook" kind? Thanks for any help fellas.
Michael






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ran into a problem changing my timing belt. [900][1994]
posted by  Mike 94 940T  on Tue May 28 04:05 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.